Disassemble your camera, look at the main chip, and search for the model number on the OpenIPC Wiki .
Open your camera case and check chip markings (e.g., HiSilicon, SigmaStar, Goke) Required Tools: You will typically need a USB to TTL adapter for UART communication and a computer running Linux or the OpenIPC BURN Utility outpost.bz FPV Specifics: openipc
Some cameras check the MicroSD card slot upon boot. If a specially configured bootloader file is present, the camera will automatically flash the new firmware. Disassemble your camera, look at the main chip,
Once installed, OpenIPC transforms your device into a flexible, professional-grade network camera. Disassemble your camera
If your camera has a speaker and microphone, use gstreamer to create a two-way audio tunnel: