Drager Pulsar 7000 Manual __full__ Jun 2026

The transmitter and receiver must be mounted on stable structures, such as steel columns, to prevent misalignment caused by vibration or thermal expansion. The optical path must be clear of obstructions. Electrical Connections

The receiver must learn the baseline clarity of the clean air at your site. Ensure the atmosphere is entirely free of hydrocarbon gases during this step. Via the HART interface or the magnetic wand interface on the receiver, initiate the . The receiver will sample the light for a few minutes and store the 100% transmission baseline. Bump Testing and Verification drager pulsar 7000 manual

Once optimized alignment is locked in, you must establish a baseline reference value in clean air: The transmitter and receiver must be mounted on

Remove the card; the system must automatically return to 4 mA (0 LEL-m). 5. Understanding Fault Codes and Troubleshooting Ensure the atmosphere is entirely free of hydrocarbon

Ensure a completely clear line of sight between the transmitter and receiver. Vibrating structures, growing vegetation, or temporary scaffolding will interrupt the beam.

Unscrew the rear housing cover of the unit to expose the terminal block.