152fmh Engine Service Manual — =link=

Remove the three bolts securing the cam sprocket to the camshaft. Carefully slip the sprocket off the cam while holding tension on the cam chain so it does not fall into the bottom crankcase.

Disconnect the fuel line, choke cable, and throttle slide assembly. Unbolt the carburetor from the intake manifold. 152fmh engine service manual

Because these are clones, the original Honda service manual is 80% accurate, but a dedicated covers the specific tolerances for Chinese metallurgy and manufacturing variances. Remove the three bolts securing the cam sprocket

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Unbolt the carburetor from the intake manifold

: 110cc displacement class (specifically 107cc actual displacement) Core Specifications Engine Type: 4-Stroke, Single Cylinder, Air-Cooled, SOHC Actual Displacement: 107 cm³ Bore x Stroke: 52.4 mm × 49.5 mm Compression Ratio: 9.1:1 Maximum Power: ~7.0 HP (5.2 kW) @ 7500 RPM Maximum Torque: 7.5 Nm @ 5000 RPM

Clean the air filter, check spark plug condition, and inspect for oil leaks.